Mistcooling Misting Systems Complete DIY Kit 12 Nozzles System With Misting Pump

In stock
₹13,500.00
  • Medium pressure minimum 3kg pressure required to start a mist and up to 160 Psi to get ultra Fine mist by using 100 to 160 Psi Mist Pump with 3/8" inlet and outlet screwed female BSP threads.
  • DC Pump whisper Quieter approx 55 Db, run at 220volt single phase with SMPS/ Adapter continuous duty averaging 6/8 hours run per day.
  • Compare water usage 0.08 Liter Per Minute per Nozzle
  • See Daily water usage chart by each house hold person who utilize average 200 Liter per day per person
  • UV Protected Black Tubing

MISTCOOLING 12 Mist Nozzle complete Cooling kit to create your own DIY misting system, easy to install, compact,and light, affordable, with low water consumption fine droplets mist nozzles, can drastically reduce the outdoor temperature up to 10-15 degrees C depending on the Humidity conditions, for residential, commercial, agricultural and industrial application, Dust and Odor control, Commercial cooling, special effects, animal cooling, insects control , ideal for Patio, Gazebo, Pergolas, Pool area, mosquito control spraying, green house, textile industries for humidification, produce case, cold storage to keep fresh vegetables and fruits. Kit Include: Misting Pump single Phase (with SMPS/adapter -AC-DC )Mid Pressure up to 120 Psi. built in motor (Monoblock type ) with 3/8 inch Inlet and outlet screwed Female ports. SMPS / Adapter will run DC Pump power with AC 220 Volt single phase 50Hz) Pump Inlet fitting for suction 3/8" Threaded x 3/8 Push To connect for water supply Tubing.- 1 Pc Water Supply Tubing 3/8" - 10ft Adapter 1/2" Pipe Female Threads to 3/8" Tube Push To Connect to connect the water source - 1 Pc Inline water filter with Push to connect Tube fittings for 3/8" water supply line to minimize nozzle clogging. Pump Outlet Fitting for delivery 3/8" Male Thread x 1/4" push to connect for Mist line.-1 Pc Mist Nozzles with Stainless Steel orifice 0.3mm with nickel plated in brass body 12 Pcs, Nozzle End Plug-2 Pc, Nozzles Tee Fitting, Push to Connect 3 way equal union for installing Tube at both side and misting nozzles adapter fitting at the middle. Nozzles adapter fitting- with 10/24 UNC Threads for Misting Nozzle- 12 Pcs Mist Tubes 1/4" white 40 ft long. To cut and create a misting line as per your need. Suggested nozzle distance 2 to 3ft . End Plug to close the Mist Line- 1Pc Zip Tie to tie tubing to your structure- 15 pc Alternate Tube Clamps plastic for installing Tube attached to your structure- 12 Pc

  • Medium pressure minimum 3kg pressure required to start a mist and up to 160 Psi to get ultra Fine mist by using 100 to 160 Psi Mist Pump with 3/8" inlet and outlet screwed female BSP threads.
  • DC Pump whisper Quieter approx 55 Db, run at 220volt single phase with SMPS/ Adapter continuous duty averaging 6/8 hours run per day.
  • Compare water usage 0.08 Liter Per Minute per Nozzle
  • See Daily water usage chart by each house hold person who utilize average 200 Liter per day per person
  • UV Protected Black Tubing
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account